Mini 5 in 1 Str’ Bit – M

18,500.00

In stock

Add to Wishlist

Versatility is now in your hands but in a mini but mighty form

Perfect for those who find it difficult to maneuver the full length of a bit.

It is important to use the whole bit evenly, which means using the tip, the belly, and the very inner section of the piece. Many find this difficult as the position can feel quite awkward and therefore do not get to use the last grit & in turn wear out a bit faster.

The Mini 5 in 1 solves this problem

Also features a safety edge to protect your client’s cuticles.

Designed to cut smoothly in both clockwise and counter-clockwise directions, making them perfect for right and left-handed nail techs.

Great for removals and infills of builder gel, structured gel manicures, and acrylic overlays on fingernails and toenails.

MINI 5 IN 1 STR’ Bit – M

5.2mm

Consisting of 3 grades. XtraFine in the very tip, Fine in the belly of the bit and Medium in the base of the bit.

Straight-cut

Safety Bit (R-cut)

Speciality Carbide

Diamond-like Coated to protect against rust and oxidation and increase shelf-life

100% Tungsteen Carbide Steel

Right-handed & left-handed use

Standard Shaft width of 3/32″

Fits all E-file machines

Use at 20k – 25k RPMs depending on the torque of your e-file machine

CLEANING AND DISINFECTION

The bit must be cleaned after every client by following our instructions.

Our mini mandrel bit has a lifetime guarantee

1.Soak in Hot Water + Degreasing Soap + Brass Brush.

2. Rinse

3. Soak in Salon grade Disinfectant for the recommended time.

4. Rinse

5. Dry on a microfiber cloth.

Do not air dry your bits or soak them in acetone.

Only soak in disinfectant for the recommended time.

Air drying & soaking in chemicals longer than the recommended time will introduce oxidation+ rust which will dull your bits and shorten their life span.

Reviews

There are no reviews yet.

Be the first to review “Mini 5 in 1 Str’ Bit – M”

Your email address will not be published. Required fields are marked *